Moved your Ironside to a new place and now it won't POST? Almost always one of three things.
1. GPU unseated
Heavy GPUs (5080+, 4090+) can shift in transit. Open the side panel, press down on the GPU until it clicks back into the PCIe slot. Don't forget to re-screw the bracket.
2. RAM unseated
Push down firmly on both ends of each RAM stick. You should hear a click when the tabs lock.
3. PSU switch
Check the back of the power supply. If the switch flipped to 0, flip it to 1.
Still no POST? Reply to your order email with a photo of your debug LEDs (the little LEDs on the motherboard) and we'll walk you through it.
Was this helpful?